Total Pageviews

Showing posts with label Blades. Show all posts
Showing posts with label Blades. Show all posts

Tuesday, September 25, 2012

Vidyut Supermax

 

I tried these blades out last week.  I've been in a rut as far as trying new things - I guess I really like what I've been using (lately it's been Nacet blades, Musgo Real cream, plus my other staples) so much that I haven't wanted to deviate from the norm.  But if we don't try new things, we can never have new favorites, right?

Well, that's not what happened here.  I wasn't impressed with the Vidyut's performance - I ended up with quite a few nicks and had to do an extra pass to get the shave I expect from my Nacets.  These were such a ho-hum experience, in fact, that there is little I even care to say about them.

I keep trying to find new blades that are as good as Nacets (if not better) but I'm not having much luck.  There was a type of Gillette that my pal Joe gave me to try... it was an absolutely superb shaver, but I can't for the life of me remember what it was.

Hopefully I will have a review of those up before long.  In the meantime, it's back to Nacets.

Thursday, August 30, 2012

Blade disposal

I tend to use my blades maybe four to six times before they get too dull for an effective shave.  At this point they tug rather than cut the hairs and are uncomfortable.

Generally I remove the blade from my razor and drop it in the trash.  Recently I was out in the sticks, and didn't want to leave the blade lying around, so I put it in the front pocket of my Dopp kit to dispose of later.

Then I completely forgot about it.

A few weeks later, I was emptying out my Dopp kit and felt something in the front pocket (it turned out to be a pair of tweezers).  I reached in to pull them out and my finger nail caught the fabric, tearing it a little.  I jerked my hand out with a mental "WHAT THE HELL?!?" and stared dumbly at my split nail.  Being more careful this time, I reached in again, and cut nearly half of my finger nail off.  It was as painful as it sounds.

It wasn't the fabric catching my nial (duh); it was the used blade I had forgotten about.  It decided to remind me.

So I carefully removed it, tossed it, and examined my injuries.  My middle finger nail was cut about halfway across and halfway down.  It sucked.

So, I began looking into ways of safely getting rid of blades, when I found these:



I found a few on Amazon for three to six bucks.  There are vintage ones too, that look like lighthouses, barber poles, UPS trucks, snowmen, and who knows how many other things.  But you could always make one like the tin can example above.  The idea is to have a place to store them that they won't spill out of and won't cut through.

There are plenty of good reasons to do this; I will cover two. 

One, you can be sure what happened to my finger won't happen to yours, or anyone else's in your family - this is especially important if you have small children in the household.

Two, the blades are made of high quality steel.  Keeping them together like this makes it easy to recycle them.  You won't likely get any money out of it, but it's thre right thing to do.

Plus, if you get one of the vintage banks, think of the style and character you can add to your shave den!

Tuesday, May 22, 2012

Resources

There are a lot of sites on the internet that you can go to for information on wet shaving.

One site I really enjoy is Badger and Blade. The forums there are so full of good information, good links, good supplies and good people that I haven't been able to scratch the surface after more than a year.

If you have a question, it's likely been answered there. If not, ask! Someone (several someones, in all likelyhood) will be along shortly with some clarification.

If you want to get started in wet shaving, B&B has advice, tutorials, vendors, reviews, links, and a buy/sell/trade marketplace where you can find absolutley anything you'd need.

Check it out at http://badgerandblade.com/

There are plenty of other fine shaving forums that I haven't explored yet, so I can't give any recommendations for them. But you should be able to find one or several that suite you.

Another great site is Youtube. There are so many videos on wet shaving I don't even know where to begin. The subjects cover the entire range of knowledge, including face, bowl and palm lathering; shaving creams vs sticks vs soaps; badger (and grades thereof) vs boar vs horse vs synthetic; straight, single edge and double edge razors; blades and strops and hones and techniques and...

Well, you get the idea.

Once you have decided on what you want to get, some vendors I have used include BullGoose Shaving, The Italian Barber, West Coast Shaving, and Mikes Natural Soaps. I have had great experiences with each of them, and I am affiliated with none. I get no kickback for guiding anyone to them, I'm just telling you how it went for me.

One thing there doesn't seem to be a lot of is brick and mortar stores (as opposed to internet storefronts). The area I live in is an absolute barren wasteland as far as B&M stores go. I did get to go to Merz Apothecary in Chicago, which has so much stuff geared toward wet shaving that it's almost overwhelming.

If you are in an area where you can find a shop like that, by all means check it out - the advantage of being able to see, touch and smell the things you are thinking of buying is incomparable. Especially if it's colognes, aftershaves, scented soaps, etc. There is no way to know how you will like a scent based on someone elses review.

Sunday, May 20, 2012

Gillette Silver Blue


Joe gave me one of these to try out. I was a little reluctant after my 7 OClock experience, but in the spirit of the scientific method I figured I would give it a fair shot on the roster. I'm glad that I did.

I found the Silver Blue to be a very mild shaver. Not so much so that I have to make extra passes, but it certainly is forgiving, and might be a really good beginner blade.

I've got about three or four shaves with this blade so far, and it's still comfortable and close.

Like the Astras, these are made in Russia. The quality of the steel is good, but the price is a bit high end.
I'm not sure that they would be in my regular line up, but I wouldn't pass them up if I found a good deal.

Wednesday, May 16, 2012

Astra Blades

A friend of mine and blog follower gave me one of these to try out. I heard good things about them, but I'd heard good things about Derbys too, and look how that went...

Anyway, I'm on my second shave with them, and I think I may have found a replacement for my beloved Nacets. This blade has, so far, been a smooth and consistent shaver; zero issues with excessive nicking (although I did catch my lower lip this morning - operator error, not equipment malfunction), no tugging or pulling, just a smooth easy shave. For a bluebeard like me, that's pretty important. I'm also experiencing zero irritation, something I had been battling for the last week or so. I managed to smooth down the left side of my jawline, which had been another consistent problem - but that's a technique issue for another post.

From my research, I've learned that these are nearly as sharp as Feather blades, which is a little scary, but last longer. I don't tend to try to get a long life out of my blades right now; partly because they are so inexpensive as it is, and partly because I want to try more types.

Produced by Proctor and Gamble (Gillette), they used to be made in the Czech Republic. Now they're made in Russia. You can pick up 100 of these for about $15.

I noticed that when I opened this blade there were two little glue spots on the blade that held it inside the wax paper. I haven't seen this on any other blade I've tried, but it doesn't seem to be an issue. I haven't heard of any quality control problems either, like I've been hearing about my Nacets, so I'm pretty sure this will be on my "to buy" list.

Merkur Trimming Razor Pt 2

I got one of these yesterday as a birthday gift. It came with a small pack of razorsmade by, of course, Merkur.

I couldn't wait to try it out. So, this morning, I did.

I prepared myself in the usual manner (see The Routine) and went to work with my '67 and an Astra blade over Musgo Real shave cream. I used the trimming razor on the first and third passes. It worked brilliantly, making easy work of the small, hard to get to areas right under my nose. The wider side seemed to work a little better, while the smaller side was a little difficult to get proper placement with.

The blade wasn't the best - there was a lot of tugging and it almost felt like dry shaving. I think this might have had to do with my technique though. I will be using this daily so I will have plenty of time to refine my methods.

It is also easy to misjudge the angle with this because the head is sort of oddly sloped. Once I get used to it I don't think it will be an issue.

If there were competing blade manufacturers for this razor I'd jump at the chance to try them out, but I'm pretty sure Merkur is the only company making them (it is their product after all).

So, minor blade dissatisfaction aside, the Merkur Trimming Razor is everything I hoped it would be.

Trimming Razor - day 2

Still a bit of pull and tug, but it seems to be limited to the initail pass with this tool. It's still a little hard to figure its nuances as far as blade angle and such, but it does an admirable job of clearing the moustache area.

Monday, May 14, 2012

Derby Blades

I heard good things about these and was looking forward to trying them out (I had a pack in the sampler that I bought).

I won't be using them again.

These delivered one of the worst shaves I've had yet. It wasn't that I felt a lot of tugging or pulling, but the action was definitely not smooth, and my face was alternately raw or rough in various places.

It may come down to the type of razor you use or personal technique. Either way, these don't fit my style.

Monday, April 30, 2012

Feather, Day 2

Today I was able to shave without distraction. With my once used Feather blade in hand and The Routine completed, I lathered up some Col Conks and CO Bigelow and went to town. I ended up with a nick or two but nothing major, and nothing that really bled. My neck isn't as raw this time either. I'm not sure how to quantify the amount of sharpness lost on a blade, and I have no idea how much less sharp the once-used Feather blade was, but it was a better shave today. In the interest of utilizing the scientific method, I will have to have a situation that I can reproduce in order to compare results. Therefore, I am considering this my first test shave with a Feather blade, and will have to have at least two more tries with a fresh blade to know how this product works for me.

So aside from the tiny nicks, my face feels pretty raw. I had to go over a few rough patches after my third against the grain pass, and didn't relather for that. I think the problem is the angle that I'm holding the razor. It isn't consistent, causing me to miss spots and have to redo them. I've been working on this by changing my grip and trying to focus on the blade angle but I haven't eliminated the problem yet.

I'll be shaving with the Feather blades the rest of the week, at least, so I will publish the results in following posts.

Sunday, April 29, 2012

Feather Blades

Feather blades. Made in Japan, a place known for many a legendary blade. It is accepted that they are the sharpest Double Edge blades available, the only product on par being Iridium blades - which are no longer in production.

Surely you could understand my reasons for putting off a test shave with one of these.

Well, this morning I had no time obligations. I slept in, ate breakfast at 10 a.m., and took a shower around 10:30. As I prepared my '67 Gillette, I considered dropping in a brand new tired and true Nacet Platinum. Then I thought about my blog. Not much to write about if I never try new things.

Well, the damned things live up to their reputation. They are sharp. I had one good cut that bled steadily for a good while. My neck was irritated and a bit bumpy at the end of the shave. I had high rough patches on my face. But this isn't entirely the fault of the worlds sharpest DE. I had company in the bathroom.

My bathroom is pretty little. One pedastal sink is all we get. On weekends my little boy likes to "shave" with me, using some lather and a Spongebob toy razor. So he and I shared the sink and went about trimming our beards.

Then my Dad showed up, and wanted to watch the bonding. Then my woman came in, and wanted to know what was taking so long. I began to hurry. Soon after, I began bleeding. The obvious lesson here is, respect these blades. They bite.

So my first Feather shave was a bit of a disappointment. But I've only been wet shaving for a few months now, and Feathers are recommended for advanced shavers only. Maybe I jumped the gun.

I will reattempt a shave with the Feather blades tomorrow without the distractions, but to be honest I'm looking forward to switching back to my Nacets.

Wednesday, April 4, 2012

Merkur Trimming Razor

Someday I will own this. It is absolutely perfect. It is a very small razor that is designed for trimming beards, moustaches, and eyebrows. All I need it for is the little tight corners under my nose - the very upper edge of the moustache that is almost impossible to get with a cartrige blade and very difficult with a Safety Razor. It wouldn't get a whole lot of use, but it would be used every day. Whoever thought of this needs a Nobel Peace Prize (since they just hand them out anyway).

Monday, April 2, 2012

The '67

This morning I decided I would use my 1967 Gillette Super Speed. I don't know why I got that idea in my head, but I'm glad I went with it. This morning was one of my best shaves yet. 

I used a new blade in this as yet untested razor, and it seemed like a good time to put a new set up to the test, since there aren't many people at work on Mondays (I don't have the luxury of deciding I want that day off). 

The blade was a Nacet Platinum:

Once again, there was no rhyme or reason to selecting this blade, other than it was in the sample pack I recieved.

Todays shave was, I believe, my best results yet.

How much of that was due to my set up, and how much to technique, I can't say. I did, however, pick up on a problem I've been having with lathering - namely, not getting enough lather on my face before starting. I think my lather has been a bit too dry too, lending to the blade skipping over my face instead of gliding smoothly over it.

Whatever the problem was, I am happy with todays results. Aside from my usual rough patches (angle of the jaw and the jawline), it's an amazingly smooth and pain free shave.  So much so that I am reluctant to move on to other blades, but then, I wouldn't have much else to write about, would I?

I will try a Nacet next week in the 40 Super Speed, and a different blade in the '67. That should give me a good gauge on the performance of blades vs. razors.

Wednesday, March 21, 2012

Wilkinson Sword Blade

I tried a Wilkinson Sword Blade in my Super Speed this morning. I can't quite put my finger on it, but something about this blade makes me not like it. It's not bad, it does the job just fine without too much irritation or hassle. Maybe I'm just overthinking it, because the shave was okay. Not great, mind you, but okay. I'll give it a week and see what I think of it then. I didn't mess with the Prorasso soap today, I just stuck to the proven C.O. Bigelow cream instead. A few rough spots, but no real nicks. I want to get those rough patches gone, and without having to shave my face raw. Maybe the WSB just isn't the right blade.

Monday, March 5, 2012

My Stuff

I am using a 1940's vintage Gillette Super Speed double edged safety razor. I have another Gillette Super Speed from 1967. I bought the razors for about $12 including shipping on Ebay.

My brush is a Boar bristle of unknown make that was given to me by a generous member of a forum I belong to.
I bought a stand for my razor and brush for $40. For my Col Conk's soap I use a small wooden bowl I found in the pantry, and lather up in a cappucino mug I picked up at Target for $4.
Some C.O. Bigelow (aka Prorasso) shave cream cost me $10, a can of Prorasso cost me $9, and I was given a puck of Col Conk's Bay Rum shave soap.

I ordered a sampler pack of razor blades, too numerous to list here. I will name them off as I use them. The cost was around $30.

And of course the scents and skin care:

Clubman Bay Rum. Very inexpensive and smells like an old fashioned barber shop.

Art of Shaving Peppermint Face Wash. Awesomesauce.

Art of Shaving toner. Unscented, good for the skin. Tightens the pores.

Art of Shaving After Shave Balm, Sandalwood. One of my favorite scents and a fantastic after shave. Very soothing.

Lucky Tiger Moisturizer. Old school goodness.

Michael Jordan cologne. Smells as good as he plays.

Once a week I use french green clay mask to clean my face thoroughly. Its inexpensive and very effective.

So I'm off and shaving. Bear in mind that I have several soaps and blades to experiment with. Once I figure out what works best for me I'll cut the recurring costs down substantially. Especially when the occasional after shave or brush pops up for a birthday or Christmas ;)